Anker’s 10‑in‑1 Nano USB‑C Hub adds a 240 Hz display to the desktop accessory lineup

---

Anker’s 10‑in‑1 Nano USB‑C Hub (A210C) arrives with a 240 Hz display, 100 W PD and a full desktop‑dock port set

---

Anker has taken its popular Nano USB‑C Hub series a step further, unveiling a model that integrates a small but fast 240 Hz LCD panel on the front of the dock. The panel shows real‑time charging voltage, current and power draw, and it can be queried remotely through the Anker Mobile app. The hub, identified as model A210C, will hit the Japanese market in the fall of 2026 and is priced at ¥16,990 (about $107).

---

What’s new?

• 240 Hz status display – a 5 cm‑wide LCD that refreshes at 240 Hz, far faster than the typical 60 Hz status LEDs found on most docks. The high refresh rate makes the read‑out appear smooth even when the laptop is charging at high wattage.
• Dual Power Delivery – a rear USB‑C PD input that can deliver up to 100 W to a host laptop, plus a front‑facing USB‑C port that supplies 7.5 W (useful for powering peripherals or a phone).
• Full‑speed data – the front USB‑C port supports 10 Gbps, the two USB‑A ports on the front run at 10 Gbps (one) and 5 Gbps (two), and the SD / microSD slots hit 104 MB/s, which is on par with dedicated card readers.
• High‑refresh external video – HDMI 2.1 and DisplayPort 1.4 outputs can drive a 4K display at 144 Hz, or a 1080p panel at up to 240 Hz, matching the hub’s own screen refresh.
• Gigabit Ethernet – a RJ‑45 port adds wired networking without sacrificing any of the other I/O.
• Compact chassis – measuring 130 × 56 × 50 mm and weighing 300 g, the hub fits comfortably on a desk while still offering a full desktop‑dock experience.

---

How it stacks up against the competition

Feature	Anker Nano 10‑in‑1 (A210C)	Dell WD19TBS	CalDigit Thunderbolt 4 Element Hub
Display on dock	240 Hz LCD (5 cm)	none	none
PD input	100 W	130 W	100 W
USB‑C data	10 Gbps (front)	5 Gbps	40 Gbps (Thunderbolt)
USB‑A ports	1 × 10 Gbps, 2 × 5 Gbps	2 × 5 Gbps	2 × 5 Gbps
Card slots	SD / microSD 104 MB/s	none	none
HDMI / DP	HDMI 2.1 4K@144 Hz, DP 1.4 4K@144 Hz	HDMI 2.0 4K@60 Hz, DP 1.4 4K@60 Hz	Thunderbolt‑compatible DP via adapter
Ethernet	1 Gbps	1 Gbps	none
Dimensions	130 × 56 × 50 mm	200 × 120 × 40 mm	96 × 96 × 30 mm
Price (JPY)	¥16,990 (~$107)	¥34,800 (~$220)	¥29,800 (~$190)

The most obvious differentiator is the built‑in display. While Dell’s WD19TBS and CalDigit’s hubs focus purely on connectivity, Anker gives users a visual cue for power delivery, which can be handy for creators who frequently switch between laptops and external batteries. In raw bandwidth, the Thunderbolt‑4 hub still leads with 40 Gbps, but the Anker dock’s 10 Gbps USB‑C link is more than enough for most USB‑3.2 Gen 2 peripherals.

---

Who will benefit?

• Content creators and streamers who run a laptop on high‑wattage PD while needing a quick glance at charging status. The 240 Hz LCD eliminates the lag you get from a static LED indicator.
• Mobile gamers who already own a 240 Hz external monitor. The hub can push that refresh rate over HDMI 2.1 or DP 1.4 without needing a separate graphics adapter.
• Travel‑heavy professionals who appreciate a single cable for power, networking and peripherals, and who like the option to monitor power draw from a phone app.
• Users on a budget – at roughly $107 the hub undercuts most premium docking stations that lack the display feature, making it a cost‑effective way to add a 4K@144 Hz video output and Ethernet.

---

Potential drawbacks

• The rear‑facing PD input caps at 100 W, which is sufficient for most ultrabooks but may be limiting for high‑performance laptops that request 130 W or more.
• The front USB‑C power output is only 7.5 W, so you cannot charge a phone at full speed while the hub itself is delivering 100 W to the laptop.
• Anker has only announced a Japan‑only launch. International availability is still uncertain, and regional pricing could vary.

---

Bottom line

Anker’s A210C Nano USB‑C Hub brings a novel visual element to the crowded dock market while keeping the port selection competitive. The combination of a 240 Hz status screen, 100 W Power Delivery, dual‑card slots and high‑refresh video output makes it a compelling choice for power users who value real‑time feedback on charging. If the price stays close to the announced ¥16,990, it will likely become a go‑to accessory for anyone building a compact, high‑performance workstation on a laptop.

---

For the official product page and firmware updates, see the Anker Japan announcement.